Long-term skeletodental changes with early and late treatment using modified C-palatal plates in hyperdivergent Class II adolescents.

OBJECTIVES: To compare skeletodental changes between early and late treatment groups using modified C-palatal plates (MCPP) and long-term retention outcomes in hyperdivergent Class II adolescents. MATERIALS AND METHODS: Seventy-one hyperdivergent Class II patients were divided into four groups according to treatment modality and treatment timing: group 1, early treatment with MCPP (n = 16; 9.9 ± 0.9 years); group 2, late treatment with MCPP (n = 19; 12.3 ± 0.8 years); group 3, early treatment with headgear (HG; n = 18; 9.6 ± 0.8 years); and group 4, late treatment with HG (n = 18; 12.1 ± 1.2 years). Lateral cephalograms were taken and skeletal and dental variables were measured. For statistical analysis, paired t-tests, independent t-tests, and multiple regression were performed. RESULTS: The early MCPP group showed a more significant decrease in mandibular plane angle than the late MCPP group did, and vertical control was more efficient in the early group than in the late group. In the MCPP groups, both FMA and SN-GoGn were increased with late treatment but decreased with early treatment, and the difference was statistically significant (P < .01). The early-treatment MCPP group had a significant decrease in SN-GoGn of 0.6° compared with an increase of 1.7° in the early treatment HG group (P < .01). Posttreatment stability of both the early and late MCPP groups was maintained in long-term retention. CONCLUSIONS: Early MCPP showed more significant vertical control than late MCPP. However, there was no difference in long-term stability between early and late groups.

Comparison of posttreatment stability after total mandibular arch distalization with mini-implants and mandibular setback surgery.

OBJECTIVES: To compare posttreatment stability in skeletal Class III patients between those treated by total mandibular arch distalization (TMAD) with buccal mini-implants and those by mandibular setback surgery (MSS). MATERIALS AND METHODS: The samples included 40 Class III adults, 20 treated by TMAD using buccal interradicular mini-implants and 20 treated with MSS. Lateral cephalograms were taken at pretreatment, posttreatment, and at least 1-year follow-up, and 24 variables were compared using statistical analysis. RESULTS: Mandibular first molars moved distally 1.9 mm with intrusion of 1.1 mm after treatment in the TMAD group. The mandibular incisors moved distally by 2.3 mm. The MSS group exhibited a significant skeletal change of the mandible, whereas the TMAD group did not. During retention, there were no skeletal or dental changes other than 0.6 mm labial movement of the mandibular incisors (P < .05) in the MSS group. There was 1.4° of mesial tipping (P < .01) and 0.4 mm of mesial movement of the mandibular molars and 1.9° of labial tipping (P < .001) and 0.8 mm of mesial movement of the mandibular incisors in the TMAD group. These dental changes were not significantly different between the two groups. CONCLUSIONS: The TMAD group showed a slightly decreased overjet with labial tipping of the mandibular incisors and mesial tipping of the first molars during retention. Posttreatment stability of the mandibular dentition was not significantly different between the groups. It can be useful to plan camouflage treatment by TMAD with mini-implants in mild-to-moderate Class III patients.

A 3-dimensional evaluation of available retromolar space for the application of ramal plates.

INTRODUCTION: This study aimed to evaluate the available retromolar space for ramal plates in patients with Class I and III malocclusions and compare that space with and without third molars using cone-beam computed tomography. METHODS: Cone-beam computed tomography images of 30 patients (17 males, 13 females; mean age, 22.2 ± 4.5 years) with Class III malocclusion and 29 subjects (18 males, 11 females; mean age, 24.3 ± 3.7 years) with Class I malocclusion were analyzed. Available retromolar space at 4 axial levels of the second molar root and the volume of the retromolar bone were evaluated. Two-way repeated measures analysis of covariance (repeated measures analysis of covariance) was applied to compare the variables between Class I and III malocclusions and the presence of third molars. RESULTS: Patients with Class I and III relationships showed up to 12.7 mm of available retromolar space at 2 mm apical from the cementoenamel junction (CEJ). At 8 mm apical from CEJ, patients with Class III malocclusion had 11.1 mm of space, whereas those with a Class I relationship showed 9.8 mm of available space. When patients had third molars, the amount of available retromolar space was significantly greater in patients with a Class I and III relationship. However, patients with Class III malocclusion exhibited greater available retromolar space than those with a Class I relationship (P = 0.028). In addition, the bone volume was significantly greater in patients with Class III malocclusion than in patients with a Class I relationship and those with third molars than in those without them (P <0.001). CONCLUSIONS: Class I and III groups showed the availability of at least 10.0 mm of retromolar space 2 mm apical to the CEJ for molar distalization. Based on this information, it is suggested that clinicians consider available retromolar space for molar distalization in diagnosing and planning treatment for patients with Class I and III malocclusion.

Evaluation of modified C-palatal plates on speech articulation using acoustic analysis.

INTRODUCTION: The purpose of this study was to assess speech perturbation and adaptation for patients wearing modified C-palatal plates (MCPPs) over time. METHODS: The sample consisted of 40 patients, 20 wearing MCPPs as the experimental group (age: 20.7 ± 5.8 years) and 20 patients wearing a transpalatal arch (TPA) as the control group (age: 21.5 ± 6.4 years). The sounds /t/, /d/, /s/, /n/, /r/, /tʃ/. and /j/ were recorded for each patient at six time points: immediately before (T0) and after (T1) appliance placement; then 1, 2, 3 and 4 weeks after placement (T2-T5). Acoustic analysis of pitch and voice onset time (VOT) was performed by Praat software. Repeated measures analysis of variance (RM-ANOVA) was used to assess changes in the pitch and VOT over time and the difference between the appliances. RESULTS: With the MCPP appliance, /n/, /r/, /tʃ/ and /j/ decreased in VOT starting in the first week while /t/ and /s/ almost returned to pre-treatment levels after 2 weeks. VOT for the /d/ sound did not change between T0 and T3, but it decreased after 3 weeks. There were no significant differences in pitch and VOT between the two groups at any time point. CONCLUSIONS: Wearing an MCPP device caused patients to initially distort the articulation of several sounds, but the distortion dissipated within 1 to 2 weeks. It is recommended that patients and/or their parents be advised during pre-treatment counselling of the possibility of temporary speech changes with MCPP placement.

Dental developmental complications in pediatric hematopoietic stem cell transplantation patients: A study using CMC clinical data warehouse.

OBJECTIVE: This study aimed to investigate the prevalence and extent of dental developmental complications in patients who have undergone pediatric hematopoietic stem cell transplantation (SCT) and identify the risk factors. MATERIALS AND METHODS: We retrospectively investigated the clinical data warehouse of the Catholic Medical Center information system for identifying patients who: 1) visited the Department of Pediatrics between 2009 and 2019, 2) underwent SCT under the age of 10, and 3) had panoramic radiographs. Thus 153 patients were included in this study. The prevalence and extent of tooth agenesis, microdontia, and root malformation were assessed using panoramic radiographs obtained after SCT, and the risk factors were analyzed using regression analysis. RESULTS: All 153 patients had at least one dental anomaly. When grouped according to the age at initial chemotherapy (≤ 2.5; 2.6-5.0; 5.1-7.5; > 7.5 years), the prevalence of agenesis showed statistically significant differences among the different age groups (P < 0.001). The prevalence of agenesis was highest in the youngest age group. As the initial age at chemotherapy increased, the number of affected teeth per patient decreased for all three anomalies. The location of the affected tooth was also influenced by the age at initial chemotherapy. Regression analysis demonstrated that young age at initial chemotherapy was a risk-increasing factor for tooth agenesis and microdontia. CONCLUSIONS: The age at initial chemotherapy may be a critical factor in determining the type, extent, and location of dental complications after SCT. These results suggest that careful dental follow-up and timely treatment are recommended for pediatric patients undergoing SCT.

Cephalometric and model evaluations after molar distalization using modified C-palatal plates in patients with severe arch length discrepancy.

INTRODUCTION: This study aimed to evaluate the dentoskeletal and soft-tissue changes after molar distalization using modified C-palatal plates in patients with severe maxillomandibular arch length discrepancies. METHODS: Twenty-four patients with Class I and II malocclusion (19.0 ± 7.3 years; 17 females and 8 males), who had severe maxillary crowding of >10 mm, and moderate mandibular crowding of >6 mm, underwent molar distalization using modified C-palatal plates and buccal miniscrews with approximately 300 g of force per side. Models were made, and cephalograms were taken before and after treatment. Cephalometric variables and arch dimensions were measured. Paired t test and Wilcoxon rank sum test were used for statistical analysis. RESULTS: In the maxillary dentition, an average of 12.4 mm of crowding was resolved by molar distalization of 4.4 mm, interproximal stripping of 0.7 mm, and arch expansion. In the mandibular dentition, crowding of 6.7 mm was alleviated by molar distalization of 2.4 mm, an interproximal of 1.5 mm, and additional arch expansion. The incisor positions were maintained (SN-U1, 101.3°; IMPA, 88.8°), and soft-tissue profiles were improved (LL/E-line -1.1 mm; P < 0.001) after treatment. CONCLUSIONS: Maxillary and mandibular tooth-size arch length discrepancy of 12.4 mm and 6.7 mm, respectively, were resolved by molar distalization, interproximal reduction, and arch expansion, whereas incisor positions were maintained, and soft-tissue profiles were improved. This could be a viable treatment option in patients with moderate-to-severe crowding.

Treatment effects of maxillary protraction with palatal plates vs conventional tooth-borne anchorage in growing patients with Class III malocclusion.

INTRODUCTION: Evaluate the treatment effects of maxillary protraction using palatal plates and compare them to those with conventional tooth-borne anchorage in growing patients with Class III malocclusion. METHODS: Forty patients were divided into 2 groups according to the type of anchorage used: group 1 (n = 20; mean age, 10.5 ± 1.6 years; palatal plates) and group 2 (n = 20; mean age, 10.0 ± 1.2 years; tooth-borne appliances). Lateral cephalograms were taken before and after maxillary protraction. Skeletal, dental, and soft-tissue variables were measured. For statistical analysis, paired and independent t tests were performed. RESULTS: Group 1 showed maxilla advancement by 2.3 ± 1.0 mm compared with group 2 by 0.9 ± 0.6 mm, and group 2 indicated clockwise rotation of the mandible, but there was no such clockwise rotation in group 1 (P <0.001). Group 1 had a less lingual inclination of the mandibular incisors than group 2 (IMPA, -1.0 ± 3.8° vs -3.8 ± 2.8°; P <0.05). There was no difference in soft-tissue changes between the 2 groups. CONCLUSIONS: A facemask with palatal plate induced maxillary advancement with less mandibular clockwise rotation and dental movement than conventional tooth-borne anchorage. This modality can be used efficiently for maxillary protraction in growing patients with Class III malocclusion.

Common dental anomalies in Korean orthodontic patients: An update.

Objective: The aim of this study was 1) to investigate the prevalence and pattern of dental anomalies (DAs), 2) to compare DAs according to the type of malocclusion, and 3) to investigate the correlation between tooth impaction and other DAs in the Korean orthodontic population. Methods: A total of 3,240 orthodontic patients were classified as Class I, Class II, or Class III malocclusion groups. The presence and location of common DAs, including impaction, microdontia, agenesis, supernumerary tooth, transposition, and fusion, were identified by examining diagnostic records. Furthermore, samples were classified as Group 1 without impaction or Group 2 with impaction. The prevalence of other DAs concurrent with impaction was investigated and compared to Group 1. Results: Impaction was the most prevalent DA, followed by microdontia, agenesis, and supernumerary. Class I and Class III groups showed the same order of prevalence, but agenesis was more frequent than microdontia in the Class II group. The prevalence of the four DAs was lowest in the Class III group. Overall, 8.6% of patients were classified into Group 2. The incidence of DAs other than impaction and the prevalence of multiple concurrent DAs were significantly higher in Group 2. Impaction showed a significant relationship with supernumerary tooth, transposition, and fusion. Conclusions: The prevalence and pattern of DAs varied depending on the type of malocclusion. As there was a higher risk of other DAs in patients with impacted teeth, early detection of the impacted tooth and a detailed diagnosis of other possible DAs may be essential.

Treatment effects after maxillary total arch distalization using a modified C-palatal plate in patients with Class II malocclusion with sinus pneumatization.

INTRODUCTION: The purpose of this study was to evaluate the treatment effects after molar distalization using modified C-palatal plates in patients with Class II malocclusion with maxillary sinus pneumatization. METHODS: This study consisted of 70 lateral cephalograms derived from cone-beam computerized tomography images of 35 patients with Class II malocclusion (mean age 22.3 ± 7.4 years) who had undergone bilateral total arch distalization of the maxillary dentition using modified C-palatal plates. The samples were divided into 2 groups according to sinus pneumatization; group 1 (n = 40), cephalograms with sinus pneumatization and group 2 (n = 30) cephalograms without sinus pneumatization. Paired t tests and independent-sample t tests were used to compare the changes in each group and between groups. RESULTS: The distal movement of the maxillary first molars was 4.3 mm for group 1 and 3.5 mm for group 2, with the intrusion of 1.4 mm and 2.5 mm, respectively. There was no statistically significant difference between the 2 groups. Group 1 showed 3.5° of distal tipping of the maxillary second molars, which was significantly greater than the 0.2° in group 2 (P <0.05). The total treatment period, including distalization, was 2.2 years for group 1 and 1.9 years for group 2, but the difference was not significant. CONCLUSIONS: There was no significant difference in the amount of distal movement and intrusion of the maxillary first molars between groups 1 and 2. Therefore, these results suggest that regardless of sinus pneumatization, molar distalization using temporary skeletal anchorage devices in Class II patients can be performed as a nonextraction treatment.

Accuracy of a surface-based fusion method when integrating digital models and the cone beam computed tomography scans with metal artifacts.

The aim of this study was to evaluate the intra- and inter-observer reliability of maxillary digital dental model integration into cone-beam computed tomography (CBCT) scans to reconstruct three-dimensional (3D) skeletodental models for orthognathic patients. This retrospective study consisted of CBCT and digital maxillary dentition images of 20 Class III orthognathic patients. After two repeated fusions of digital cast images with reconstructed CBCT images by a digital engineer and an orthodontist respectively, the 3D coordinate values of the canines, first molars, and central incisors were evaluated. The intra- and inter-observer reliability of 3D positions of maxillary teeth were compared using intraclass correlation coefficients (ICCs). Intra-observer reliability of x-, y-, and z-coordinate values of maxillary teeth showed significant and excellent agreement in an engineer (0.946 ≤ ICC ≤ 1.000) and an orthodontist (0.876 ≤ ICC ≤ 1.000). The inter-observer reliability of the y- and z-coordinates of each tooth was significantly excellent or good, but that of the x-coordinates showed insignificantly poor to moderate agreement. This study showed that the integration of maxillary digital models into CBCT scans was clinically reliable. However, considering the low inter-observer reliability on the x-coordinates of dentition, clinical experience and repeated learning are needed for accurate application of digital skeletodental model in orthognathic patients.

Correction of an adult Class III malocclusion through regaining of orthodontic space and an implant restoration.

This case report describes the interdisciplinary treatment of a 23-year-old female with Class III malocclusion and a missing maxillary left second premolar. Treatment alternatives were discussed, and the selected treatment plan was presented to illustrate a way to gain space for the premolar implant restoration and correct Class III relationship through maxillary molar retraction followed by maxillary total arch protraction with a palatal temporary skeletal anchorage device. Esthetic anterior alignment and functional occlusal rehabilitation was achieved, and facial balance was maintained at the end of treatment. CLINICAL SIGNIFICANCE: Implant restoration in conjunction with regaining orthodontic space by a team of multidisciplinary dental specialists presents an effective treatment solution to permanent tooth agenesis. Class III malocclusion can be treated with a combination of maxillary protraction and mandibular retraction using temporary skeletal anchorage devices. The versatility of modified palatal C-plates presents greater clinical application when related side effects are controlled with solid understanding of their biomechanics.

The effects of a corticotomy on space closure by molar protraction using TSADs in patients with missing mandibular first molars.

INTRODUCTION: The purpose of this study was to evaluate the effects of a triangular-shaped corticotomy on the protraction of second and third molars in patients with missing mandibular first molars. SUBJECTS AND METHODS: The corticotomy and non-corticotomy groups consisted of sixteen first molars in fifteen patients (28.6 ± 9.4 years) and nineteen first molars in fifteen patients (26.6 ± 8.4 years), respectively. A triangular-shaped corticotomy was performed between the second premolar and molar. Temporary skeletal anchorage devices (TSADs) were placed between the first and second premolars in both groups. Mandibular dentition variables were measured on the pre and post-treatment panoramic radiographs and lateral cephalograms. Analysis of covariance was performed. RESULTS: The corticotomy group exhibited 2.8 mm more inter-radicular correction between the second molar to second premolar roots (P < .001) and 1.6 mm more inter-radicular distance correction between the third molar to second premolar roots compared to the non-corticotomy group (P < .01). The corticotomy group required 5.5 months less treatment time for space closure (P < .05), but the total treatment time was the same for both groups. CONCLUSIONS: The inter-radicular distance between the mandibular second premolar and molar and treatment times for space closure was significantly reduced in the corticotomy group.

Comparison of treatment effects from total arch distalization using modified C-palatal plates versus maxillary premolar extraction in Class II patients with severe overjet.

INTRODUCTION: This study aimed to compare the skeletodental and soft tissue changes with total arch distalization using a modified C-palatal plate (MCPP) and maxillary first premolar extraction treatment in Class II malocclusion patients with severe overjet. SETTING AND SAMPLE POPULATION: The sample consisted of 46 adult patients who had Class II Division 1 malocclusion with severe overjet; 25 of them received non-extraction treatment with MCPPs (age, 22.5 ± 7.2 years), and 21 received maxillary first premolar extraction treatment (age 23.4 ± 6.5 years). METHOD: A total of 26 variables were measured on pre- and post-treatment lateral cephalograms. To evaluate the differences between pretreatment and post-treatment in each group, t tests and Wilcoxon rank-sum tests were used. To compare the amount of change between the two groups, MANOVA test was used. RESULTS: The overjet was significantly reduced in the MCPP and extraction groups by 4.8 mm and 5.4 mm, respectively. However, the two groups had no significant difference in the sagittal, vertical and angular changes of the maxillary incisors. In addition, regarding soft tissue changes, the MCPP and extraction groups showed an increased nasolabial angle of 7.5° and 9.4°, decreased upper lip to the true vertical line of 1.8 mm and 2.2 mm, respectively (P < .001). CONCLUSIONS: There was no significant difference in the skeletal changes between the MCPP and extraction groups, and the reduction in overjet was similar in the groups. These results suggest that MCPP might be a viable treatment option for total arch distalization in Class II malocclusion patients with severe overjet.

Development of a maxillomandibular arch form based on the center of resistance of teeth using cone-beam computed tomography.

INTRODUCTION: Controlling transverse discrepancies is necessary to ensure stable and functional occlusion. Altered molar inclinations can camouflage the transverse relationship. The purpose of this research was to evaluate the maxillomandibular relationship of the center of resistance (CR) of the arch form created by the CR of teeth and compare these CR arch forms by their skeletal patterns. METHODS: Sixty patients with minor crowding and normal posterior overjet were divided into 3 groups according to ANB angle: skeletal Class I group had ANB angle between 0° and 4° (n = 20), skeletal Class II group had ANB angle >4° (n = 20), and skeletal Class III group had ANB angle <0° (n = 20). The 3-dimensional coordinates of the CR were estimated using cone-beam computed tomography images and projected on the CR occlusal plane to obtain the 2-dimensional coordinates. The CR arch forms were constructed and evaluated using Matlab (MathWorks, Natick, Mass). RESULTS: On comparing maxillomandibular CR arch form widths, the maxilla was significantly larger than the mandible of the canine and first premolar. The mandible was larger in the first molar of the skeletal Class III group. The maxillomandibular CR arch form width ratios were between 0.97 and 1.35. On comparing maxillomandibular CR arch form areas, the maxilla was significantly larger than the mandible in the anterior segment, and the mandible was larger in the posterior segment. The ratios were between 0.86 and 2.25. In between-group comparison, the skeletal Class III group showed significantly greater arch forms in the mandible. CONCLUSIONS: CR arch forms had significant maxillomandibular differences throughout the arch. The maxillomandibular ratios could be a reference for site-specific transverse discrepancy analysis.

Comparison of treatment effects after total mandibular arch distalization with miniscrews vs ramal plates in patients with Class III malocclusion.

INTRODUCTION: This study aimed to compare treatment effects after total mandibular arch distalization with buccal interradicular miniscrews vs ramal plates in patients with Class III malocclusion. METHODS: The sample consisted of 40 patients with Class III malocclusion; 20 were treated with distalization via buccal miniscrews (age, 25.8 ± 7.9 years), whereas 20 were treated with ramal plates (age, 26.4 ± 6.1 years). Twenty-three linear and angular measurements were analyzed on pretreatment and posttreatment lateral cephalograms. The changes in each group and differences in treatment effects between the 2 groups were evaluated. RESULTS: The mean amount of distalization at the crown and root levels of the mandibular first molars and the amount of distal tipping was 1.8 mm, 0.6 mm, and 5.4° in the buccal miniscrew group vs 3.6 mm, 2.0 mm, and 6.8° in the ramal plate group, respectively. In addition, 2.2° of counterclockwise rotation of the occlusal plane was observed in the buccal miniscrew group after 1.3 mm of molar intrusion (P <0.001). The distal movement of the lower lip was 0.6 mm in the buccal miniscrew group vs 2.3 mm in the ramal plate group. CONCLUSIONS: The buccal miniscrew group showed more molar intrusion and counterclockwise rotation of the occlusal plane than in the ramal plate group. The ramal plate produced more distalization of the mandibular dentition with clockwise rotation of the mandible. Therefore, these results can be useful when selecting the type of temporary skeletal anchorage devices to treat patients with Class III malocclusion, depending on their vertical pattern.

Long-term evaluation of maxillary molar position after distalization using modified C-palatal plates in patients with and without second molar eruption.

INTRODUCTION: The purpose of this study was to analyze the treatment effects after molar distalization using modified C-palatal plates with and without second molar eruption and to evaluate the three-dimensional position of the molars during long-term retention using cone-beam computed tomography. METHODS: The study sample comprised 74 third molars in 42 patients. Twenty-seven adolescent patients (mean age, 12.6 years) having 48 maxillary third molars were divided into 2 groups according to the eruption of their second molars: 15 patients with second molar eruption (group 1) and 12 patients without second molar eruption (group 2). Pretreatment, posttreatment, and long-term data (mean, 5.2 years) from cone-beam computed tomography were scanned and compared with control groups. RESULTS: There was less tipping movement of the first and second molars (0.94° and 3.22°) and distal tipping movement of the third molars (8.91°) in group 1 than in group 2 (4.36°, 7.39°, and 3.08°, respectively), but the treatment time was shorter and the positional change of the third molars was insignificant in group 2. In the long-term, the second molars fully erupted after distalization in group 2, and there was no difference in the third molar position between group 1, group 2, and the control group, except for the vertical position of the third molars in group 1. CONCLUSIONS: In the long-term, the second molars fully erupted after distalization, and the third molars were in a favorable position. Therefore, these findings suggest that clinicians do not need to extract developing third molars before distalization in adolescents.

Comparison of the effects of horizontal and vertical micro-osteoperforations on the biological response and tooth movement in rabbits.

OBJECTIVE: This study aimed to compare the amount of tooth movement after multiple horizontal (MH) and single vertical (SV) micro-osteoperforations (MOPs), and evaluate the histological changes after orthodontic force application in rabbits. METHODS: The mandibles of 24 white rabbits were subjected to two experimental interventions: MH and SV MOPs. Defect volume of the MOPs between the two groups was kept similar. A force of 100 cN was applied via a coil spring between the incisor teeth and the first premolars. The amount of tooth movement was measured. Differences in the amount of tooth movement and bone variables at three time points and between the two groups were evaluated using repeated-measures analysis of variance. RESULTS: The first premolar showed a mesial movement of 1.47 mm in the MH group and 1.84 mm in the SV group, which was significantly different at Week 3 (p < 0.05). No significant difference was observed in bone volume and bone fraction between the groups. Tartrate-resistant acidic phosphatase-positive cell count was also significantly greater at Week 3 than at Week 1 in both the SV and MH groups. CONCLUSIONS: The amount of tooth movement showed significant differences between Weeks 1 and 3 in the SV and MH MOP groups, but showed no differences between the two groups. Therefore, SV MOP could be considered an effective tool for enhancing tooth movement, especially for molar distalization, uprighting, and protraction to an edentulous area.

A Staged Expansion Screw Protocol to Retract the Premaxilla In BCLP Infants with Delayed Nasoalveolar Molding.

Currently, the treatment protocol for cleft palate at several centers around the world involves primary lip repair around 3-4 months of age, using presurgical nasoalveolar molding, which is done soon after birth. Unfortunately, in cases where treatment is delayed, the potential for repositioning the nasoalveolar apparatus is severely limited. The purpose of this paper is to illustrate a novel use of an expansion screw appliance to aid in the faster and more efficient active molding of the premaxillary and lateral maxillary segments in infants for whom the start of PNAM therapy is delayed, without the side effects commonly seen with pin-retained active molding appliances.